No-Hacking Waterproofing in Singapore

Allseal Waterproofing Pte. Ltd. offers no-hacking waterproofing repair methods that seal a leak without breaking up tiles or flooring, where the fault allows it.

Method Overview

No-Hacking Methods We Use

Not every leak needs tiles or flooring broken up to fix. Where the fault is a crack, a worn joint, or a porous surface rather than a fully failed membrane, one of these four methods seals the leak while leaving the surrounding finish untouched.

PU Injection

Polyurethane (PU) injection seals a crack or joint by injecting a waterproofing resin directly into it, without removing surrounding tiles. The surrounding tiles or flooring stay fully intact throughout.

The resin is injected under pressure through small drilled ports, expanding to fill the crack along its length and curing into a flexible waterproof seal, so the surrounding floor or wall stays intact.

Joint and Grout Resealing

Resealing tile joints and grout lines where the original sealant has worn away, a common cause of slow leaks. This is often the fastest and least disruptive of the no-hacking methods.

Flood Infusion

Flood infusion introduces a waterproofing compound across a ponded area, letting it migrate into fine cracks the surface alone would not reveal. The compound is applied across the whole surface rather than injected at a single point.

This method is typically used on roof decks or planter boxes, where the leak path is not a single visible crack but a general loss of waterproofing performance across the surface.

Nano or Surface Coating

A penetrating nano-coating or surface sealant for a surface that is porous rather than cracked. The coating penetrates into the surface itself rather than sitting on top as a film that could later peel.

Which Method For Which Problem

Choosing the Right No-Hacking Method

During the free inspection, we identify whether the leak is a single crack, a worn joint, a porous surface, or a broader membrane failure, and recommend the no-hacking method suited to that fault. Where the damage is too extensive for a no-hacking repair to hold reliably, we will tell you plainly rather than apply a method that is unlikely to last. This matching step is what keeps a no-hacking repair reliable, rather than treating it as a one-size-fits-all shortcut.

Benefits

Why Choose a No-Hacking Repair?

Where the fault allows it, a no-hacking method gets your leak fixed with far less disruption to daily life than a full tear-out and re-waterproofing job.

No Tile Matching Needed

Since the surrounding tiles and flooring stay in place, there is no need to search for matching tiles or live with a visible patch where new and old meet.

Faster Turnaround

Most no-hacking repairs are completed within a day, since there is no floor to break, relay, and cure before the space can be used again.

Less Disruption

No breaking, no heavy dust, and no need to move furniture or vacate the room for days, which matters most in an occupied unit.

Often Lower Cost

Without the labour and materials needed to hack, relay, and re-tile a floor, a no-hacking repair is often the more economical option where it applies.

Pricing

How Much Does No-Hacking Waterproofing Cost?

Cost depends on which method applies and the size of the affected area, so we provide a written quotation after a free inspection rather than a price over the phone. As a general guide, no-hacking waterproofing repairs typically range from SGD 450 to SGD 3,500, depending on scope.

Warranty

Our Warranty

At handover, you receive details of the completed work and the applicable warranty, according to the agreed written terms. Our no-hacking waterproofing repairs typically carry a 1 to 3-year warranty, depending on the method used. The terms are set out on our waterproofing warranty page.

Why Allseal

Why Choose Allseal for No-Hacking Waterproofing

Experience

Waterproofing and leak repair in Singapore since 2014. We have applied no-hacking methods across HDB, condo, and landed properties where the fault allows it.

In-House Team

Our own 28-person in-house team, not subcontracted labour. The same crew that inspects your leak carries out the repair, so nothing is lost between diagnosis and execution.

Written Quotation

A free site inspection and written quotation before any work begins. You will know exactly which method is proposed and why before any work begins.

FAQ

Frequently Asked Questions

Will no-hacking waterproofing work for my leak?

It depends on the cause. A localised crack, worn joint, or porous surface is often suited to a no-hacking method. A broadly failed membrane usually needs the affected area opened up, which we will explain clearly during the free inspection.

Is a no-hacking repair as durable as a full membrane replacement?

For the right type of fault, yes. It is matched to faults where the surrounding waterproofing is still sound, rather than used as a shortcut for damage that needs a full replacement.

Find Out If Your Leak Qualifies for No-Hacking Repair

Browse our completed waterproofing projects or see all waterproofing services offered by Allseal.

Scroll to Top